If you are encountering mystery puddles of water under your fridge, there is a reason for that. This is where the majority of people are likely to call the professionals. However, what they might fail to comprehend is that this is a quick fix that could easily be handled by a non-professional just as well. Thus, let’s take a quick look at it.
The vinyl tubing which is used to supply water to your fridge water dispense will occasionally develop certain leaks. Below, you will learn how to take care of this problem without any significant hassle.
Locate and replace the tubing
The most common sign for leaking tubing is when you have a water dispenser which is located in the door of your fridge. If you notice water on the floor when you open it up to fill a glass, this is likely to be caused by the tubing. In order to make sure, though, pull the fridge a bit forward and tip it back, resting it on the wall. This is going to allow you to look underneath while someone is dispensing a glass of water. If the tubing is actually leaking, you will be able to take a look at it.
Steps to fix it
The first thing you need to do is immediately disconnect that leaking tube. If there is no quick-connect coupling, however, you can easily cut the tube with something sharp – like a knife, for instance. Once you are through with this, you will need to cut off the section of the tube that is obviously damaged. You shouldn’t use side cutters as this is going to distort the tubing and it’s going to prevent a proper seal with the coupling. When you are done with this, you should simply splice in the new section of the tubing. This is going to ensure a leak-free connection that’s convenient and properly working. Make sure to plug the fridge off in order to guarantee your own safety. This is absolutely mandatory whenever you are handling any kinds of electric appliances.
Fortunately for you, the tools which are required for this DIY project are particularly simple – you will only need a utility knife and needle-nose pliers. As far as the materials for the project go, you will need to purchase quick-connect couplings as well as vinyl tubing. This is something cheap and it wouldn’t cost you more than a few dollars.
However, not all leaks are easy to repair. If you are unable to find the source or there is more to it than just a leakage, it is best to call in a technician. As you can see, when there is a need to call the professionals, don’t try to do any repairs on your own. However, you need to ensure that everything is handled properly. That is why it is important that the appliance repair company in San Diego County, you hire is experienced, licensed and insured.