DIY On How To Go About Thermal Fuse Replacement In A Dryer?

If you are having issues with your dryer, as it fails to get the job done properly, you might actually have to go ahead and get your thermal fuse checked and potentially replaced. In order to do so, you should have a proper thermostat kit which is going to contain the cut-off fuse as well as a high-limit thermostat and an electric link cord. You will have to use this particular set of tools, in order to change the blown cut-off thermal fuse as well as the thermostat. Now, the devices that you need are a quarter-inch nut driver, a cord cutter and a flathead screwdriver.

Before you even begin attempting to handle this issue, you should make sure that the device is actually plugged out. This is something important. Now, in order to handle this particular fix which is relatively simple, you should take out all of the screws which are holding the back panel on. Also, you would have to eliminate the small panel where the follower is positioned. At the very top of your heater box you are going to be able to see the thermal fuse. Once you get to it, you should use the aforementioned flathead screw driver in order to pop up the terminals conveniently and use the quarter inch nut driver to release the fuse.

Once you are done, make sure to take out the high-limit thermostat. It is going to be located near the bottom – use your flathead screwdriver to get this done conveniently. Now, use the screwdriver in order to conveniently eliminate the thermostat terminal and you would be in the position to easily install the brand new thermal fuse in the location that it needs to be. After that has been completed, you would have to set up the thermostat in the according and relevant position and plug the cables properly and respectively. After that make sure to attach the red wire with the adapter which is appears to resemble gold color. Attach it to the brand new thermostat and you are good to go.

As you can see, this is not a fix which is particularly easy, even though it is a quick one if you know what you are doing. With this in mind, if you want to ensure that everything is handled properly, it would be better for you to use the services of a professional technician who has the necessary expertise and experience. This is definitely going to make it a lot easier for you and it is also going to ensure that the technicians are able to look at all aspects – this is something absolutely critical when it comes to it. With many companies offering quality services in Innisfil, so selecting reputed service won’t be that difficult. You may like to get a free quote to know more about the level of service that they provide.

Contact us:

(619) 928-5000

[email protected]

Leave a Reply

Your email address will not be published.