Ice Maker Repair in Point Loma

Ice Maker Repair in Point Loma

If you are looking for professionals who can quickly repair your appliances, contact the Home Appliance Service Center. Ice makers have become so indispensable that even the slightest malfunction can cause serious problems. Ice Maker Repair in Point Loma, CA is an in-demand service because no business such as cafes, restaurants, bars, and clubs can do without an ice maker.

We have experienced craftsmen who know all the features of appliances from different brands and have modern repair equipment, which makes it possible to guarantee an excellent result.

Why contact the company?

Our advantages:

  • Our specialists have extensive experience working with different models of equipment from different manufacturers. They know all the ins and outs of repair and Point Loma Ice Maker Repair are able to do the job with the highest quality.
  • We have an extensive technical base - professional tools and quality spare parts that we buy from the manufacturers of the equipment.
  • We do all the work in the shortest possible time and right on the spot. You will not have to wait for weeks for our craftsman and pay for the delivery of the equipment to the service center. Within two hours specialists will arrive at your place of business, make diagnostics and perform repairs. You can call the master at any time convenient for you.

Main malfunctions

Problems with the programmer

You haven't noticed that pieces of ice are freezing on the evaporator. Defrost cycle doesn't start. First, disconnect and reset the unit. Causes of problems and solutions: Programmers. The thermostat sends a signal to the control module, which starts the defrost or freeze cycle. If the processes do not start within 12 minutes, run diagnostics.

To do this, turn the programmer shaft to defrost mode. If defrost starts, it is necessary to replace the element.  An Ice Maker Repair in Point Loma, CA technician can determine and repair such a breakdown.

Clogged nozzles or defective pumps (no water coming in)

Typical signs of malfunctioning are incorrectly shaped ice or incomplete filling of the forms. The pump is used to force water into the compartment, which comes through the nozzles. If the water doesn't come, it means that there is a blockage, which must be removed.

Opaque cubes are produced

This happens when using hard water, which contains a lot of lime and calcium. If your area has many impurities, be sure to install a purification filter. Point Loma Ice Maker Repairs will solve this problem in no time.

Faulty thermostat or switch

If the ice maker does not turn on or shuts off after 15 minutes of operation, the hopper thermostat is probably defective. No ice will be produced, or the pressure switch will trip in an emergency mode. The hopper thermostat is used to control the ice production. As soon as the temperature in the chamber reaches a certain point, the unit is unplugged.

The ice is produced longer than usual

If the cycle lasts longer than half an hour, half of the cubes are irregularly shaped, which means that the radiator is clogged (relevant for generators with air cooling). The radiator needs to be cleaned as a matter of urgency. To do this:

  •   Remove the service hatch.
  •   Loosen the screws, unfasten the front panel fasteners.
  •   Remove it from the housing.
  •   Clean the radiator with a brush and airflow.
  •   Reinstall the panels.

Call an Ice Maker Repair in Point Loma, CA technician to find the cause, tighten anything that's loose, and replace any parts that have failed.

No water in the chamber, no ice

Even if cubes form, they are irregularly shaped. There is not enough water to completely fill the molds. To perform Point Loma Ice Maker Repair:

  •   Check the fill hose shutoff valve. Open it to full capacity.
  •   Problems with solenoid valve operation. In this case the element must be replaced.

Too much water in the ice maker

In this case, the ice mold may not close from too many cubes. This indicates a malfunction in the thermostat, which controls the amount of ice in the compartment. Install the faulty part and run a test run. The only way out here is to call Ice Maker Repair in Point Loma, CA.

Home Appliance Service Center has been in the market since 2001. All of our craftsmen have more than 20 years of experience, and we take regular refresher courses. We do Point Loma Ice Maker Repair and Service and all our customers get all the services they are interested in from the comfort of their home or office. To contact us, you can call the number listed or leave a completed form on the website and our manager will contact you as soon as possible.  

Main Reason to Choose Us

We’ve been repairing household appliances since 2001. Our experience is your guarantee of quality. We are ready to come to you on the same day and inexpensively carry out high-quality repairs. We use only original spare parts!

Labor Guaranteed

We provide a 90-day warranty on every repair for every client.

Same Day Service

We carry out repairs on the same day you call us in 95% of cases.

Licence & Insured

Each repairman who works for us has a license and insurance.

Get in Touch

If you need appliance repair services in San Diego County, simply fill out the online form, and one of our representatives will be in touch right away.

Drop a message