If you see that your washing machine starts leaking on the floor, you shouldn’t really panic – this is something that tends to happen to a lot of people. You can call the professionals right away, or try handling the issues on your own. Below you will find the most common sources of leaks and ways to check, without any significant amount of hassle and issues.
Replacing Leaky Supply Hoses
The first thing that you might want to do is to locate the actual source of your leak. If the supply hose is your problem, you can replace it with a new one. However, in order to get to that conclusion, you would have to completely empty the washing machine and move it away from your wall. Once you are through, run a full cycle and look for drips which are around the supply hose connection which is going to be at the back of the machine. Replacing the supply hoses with new ones is a 5-minute quick fix that’s going to handle the issues quicker than you thought. Plus, you can easily find them in abundance in the hardware store.
Internal Hose Replacement
If you’ve come to the conclusion that the problem is not in your supply hoses, then chances are that the problem is internal. Open up the cabinet of the machine and inspect the components from the inside. If the spring clamp is worn-out, then hoses are likely to start leaking. Remove the spring clamp using adjustable pliers. However, if you can’t do it, you can call in the professional technicians who have the specially designed hose clamp pliers. They are usually found at the local hardware store. Replace the old clamps with brand new ones and this should take a handle of your problem.
A Leaky Pump Replacement
This is another issue that you might have to handle. If you spot water leaking from the pulley seal – this is usually an indicator for it as the pump is located there. Now, even though this is something that you could try to handle on your own, the pump is a very integral component of your entire washing machine. Therefore, if you fail at handling everything perfectly, you are most definitely going to have quite a few issues later on. That’s why it might be a good idea to leave this particular task to be tackled by the pros. It’s important to know when you are over-reaching. If you are uncertain about whether you can handle something on your own, despite the helpful advice listed above, you should consider taking advantage of professional assistance.
With many appliance repair companies offering to assist the residents, it is best to work with a company that is licensed and insured. You can always check if the technicians are certified and trained to work with different brands of washers.